Cel-Fi Mobile Phone Boosters in Mackay

Mine-sites often have mobile reception issues which can severely affect communication, especially in remote areas. At IBC Wiring Harness Solutions in Mackay, our mobile phone boosters can help you resolve these problems and ensure your work site is always connected. 


Cel-Fi GO for Telstra - Mobile Version are designed to increase the mobile phone reception within an area and improve self-organisation, communication and safety in remote areas. They work by capturing weak cellular signals and amplifying them within a given area to create a signal that's stronger and ultimately more reliable. By installing a booster, you could get up to 80% better mobile coverage and enhanced indoor/outdoor reception. Cel-Fi GO will increase your data speed dramatically as well as extend mobile phone battery life.

You will no longer need to stop or drive to a particular spot to make or receive phone calls.

 

Our boosters are cost effective, easy to install and adaptable for all types of vehicles. We can provide tailored solutions to suit your specific requirements, helping to solve your connectivity issues.


Call 0427 067 257 for more information.

Signal Boosters — Harnesses in Mackey QLD

Benefits of Cel-Fi GO for Telstra - Mobile Version

  • Amplify weak signals for better connectivity
  • Reduce upload & download times for efficient flow of information
  • Increase reliability for fewer drop-outs & connectivity issues
  • Enhance indoor/outdoor reception 
  • Quick and Easy installation & operation (no technical know-how required) 
  • Quality of voice call without interference or distortion
  • Less need for expensive satellite phones
  • Energy efficient to reduce load on your remote power supply
  • Minimal maintenance requirements
  • Cost effective solution for any size site and vehicles
  • Cel-Fi Go is covered by a 24 month warranty
  • Email, internet, video and social networking speeds can achieve up to 4x improvement

Ready to solve your mobile communication issues at your remote location? Get in touch with our team today!

Our Cel-Fi Product Range

Cel-Fi GO Telstra Trucker/4WD EDGE Pack

Cel-Fi GO repeater has been tested, authorised and approved by Telstra for use on the Telstra mobile network


The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a weak 3G/4G mobile signal in remote areas within your 4WD or Truck. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past.

  • Supports 3G (850) and 4G (700/1800) – only one band at a time
  • Designed for 4WD & Truck applications
  • 100dB of system gain
  • Includes external and internal antennas
  • Locked to Telstra’s Mobile Network
  • Carrier approved
  • Band Selection Button
Cel-Fi GO Telstra Trucker / 4WD GME AT4704BA – 508mm

Cel-Fi GO Repeater has been tested, authorized and approved by Telstra for use on the Telstra Mobile Network


The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a weak 3G/4G mobile signal in remote areas within your 4WD or Truck. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past.

  • Supports 3G (850) and 4G (700/1800) – only one band at a time
  • Designed for 4wd & Truck applications
  • 100dB of system gain (latest software update required using WAVE App)
  • Includes external and internal antennas
  • Locked to Telstra’s Mobile Network
  • Carrier approved
  • Band Selection Button
GME AT4704BA 4G Spring-Mount Bull Bar Antenna, 700 to 2200 MHz, 508 mm

Utilizing the proven, rugged, mechanical design of the AE4700 series of UHF antennas in conjunction with an innovative PCB electrical circuit, the GME AT4704BA 4G Spring-Mount Bullbar Antenna, sets a new benchmark for Multi-band cellular antennas in the Australian market.


Covering the 700MHz, 850MHz, 900Mhz, and 1800-2100MHz bands, the AT4704BA is a true Multi-band cellular antenna.


The AT4704BA delivers excellent LTE coverage across existing mobile phone networks ensuring you always remain connected, even in areas with limited or poor cellular network coverage.

GME AT4705BA 4G Spring-Mount Bullbar Antenna, 700 to 2200 MHz -1200mm

Using the time-tested, rugged, mechanical design of the AE4700 series of UHF antennas in conjunction with an innovative PCB electrical circuit, the AT4705B sets a new benchmark for multiband cellular antennas in the Australian market.


This high performance and extremely durable 4G antenna provides long range connectivity across all mobile networks, Australia and abroad. It is designed as an identical twin to the highly popular AE4700 UHF bullbar antenna.

  • 7 dBi gain across 698 to 960 MHz
  • 2.5 dBi gain across 1695 to 2200 MHz
  • Uses the proven and rugged mechanical design of GME’s AE4700 Series UHF antennas
  • Included is 4.8 m of low-loss coaxial cable with SMA/M connector
  • Antenna Length: 120 cm
GME MB042 – Heavy Duty Fold Down Bracket

Heavy-Duty Fold-Down Bracket

  • 4 Levels of Adjustment
  • Suits all GME UHF CB Antennas
  • Rugged Stainless Steel Construction.
GME MB038 – Stainless Steel Adjustable Bull Bar Bracket

Heavy Duty Bull Bar Bracket – Stainless Steel.

  • A generic style antenna mounting bracket
  • Suits most bull bar shapes up to 60mm in diameter
  • Includes stainless steel stirrups for easy tightening and loosening
Cel-Fi GO Telstra Caravan Pack

Cel-Fi GO Repeater has been tested, authorised and approved by Telstra for use on the Telstra Mobile Network



The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal in a caravan. Supporting voice and mobile internet for multiple mobile devices, boosting your mobile coverage whilst on holiday has never been easier.

  • Supports 3G (850) and 4G (700/1800) – only one band at a time
  • Designed for caravan applications
  • 100dB of system gain (latest software update required using WAVE App)
  • Includes external and internal antennas
  • Locked to Telstra’s Mobile Network
  • Carrier approved
  • Band Selection Button
Cel-Fi GO Telstra Marine Pack

Cel-Fi GO Repeater has been tested, authorised and approved by Telstra to use on the Telstra Mobile Network


The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal on a boat, ship or marine vessel. Supporting voice and mobile internet for multiple mobile devices, boosting your mobile coverage at sea has never been easier.

  • Supports 3G (850) and 4G (700/1800) – only one band at a time
  • Designed for marine applications
  • 100dB of system gain (latest software update required using WAVE App)
  • Includes external and internal antennas
  • Locked to Telstra’s Mobile Network
  • Carrier approved
  • Band Selection Button